.png)
Huawei MA5800-X2 OLT set DC
Code: MA5800X2MPSGDCRelated products
Product detailed description
Huawei MA5800-X2 OLT Set with 2× MPSG-G Control Boards and DC Power Supply
Huawei SmartAX MA5800-X2 is a professional 2U OLT platform designed for building and expanding FTTH, GPON, XG-PON and XGS-PON optical access networks. This set is equipped with two Huawei H901MPSG-G control boards, providing redundant system control and uplink connectivity. The DC version supports -48 V / -60 V DC power input and is ideal for ISP infrastructure, telecom nodes and networks requiring high availability.
The two MPSG-G boards provide a total of up to 2× GE/10GE uplink ports and 2× GE uplink ports. The chassis includes two slots for service or upstream boards and, depending on the installed boards, can support up to 32 GPON, 32 XG-PON or 32 XGS-PON ports. Its compact design allows installation in a standard 19-inch rack.
✅ Key Benefits
- 2× Huawei H901MPSG-G for redundant OLT system control.
- Up to 4× GE/10GE + 4× GE uplink ports with two control boards installed.
- Support for GPON, XG-PON, XGS-PON and Combo PON technologies depending on installed service boards.
- Distributed Huawei MA5800 architecture with separated control and forwarding layers.
- Redundant DC power supply for continuous telecom operation.
- Compact 2U form factor for standard 19-inch racks.
- Two service slots for flexible configuration according to the required PON technology.
- Suitable for gradual migration from GPON to 10G PON.
📊 Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Huawei |
| Model | SmartAX MA5800-X2 |
| Device type | Modular OLT for FTTH / FTTx networks |
| Chassis height | 2U |
| Control boards | 2× Huawei H901MPSG-G |
| Uplink ports per H901MPSG-G board | 2× GE/10GE + 2× GE |
| Total uplink ports with 2× MPSG-G | 4× GE/10GE + 4× GE |
| MPSG payload switching capacity | 248 Gbit/s in load-sharing mode |
| Maximum bandwidth per service slot | 40 Gbit/s with MPSG |
| Control board slots | 2×, slots 3 and 4 |
| Service / upstream slots | 2×, slots 1 and 2 |
| DC power supply | H901PISC, redundant DC power supply |
| Rated DC voltage | -48 V / -60 V DC |
| DC input voltage range | -38.4 V to -72 V DC |
| Maximum chassis input current | 20 A |
| Maximum GPON ports | 32 |
| Maximum XG-PON ports | 32 |
| Maximum XGS-PON ports | 32 |
| Maximum 10GE/GE ports per chassis | 16 |
| Maximum GE/FE ports | 96 |
| Maximum connected ONTs | 4096 |
| MAC address table | Up to 262,143 MAC addresses |
| IPv4 routing table | Up to 65,536 entries |
| IPv6 routing table | Up to 16,384 entries |
| ARP table | Up to 32,768 entries |
| Dimensions without mounting brackets | 442 × 268.7 × 88.1 mm |
| Dimensions with IEC rack brackets | 482.6 × 268.7 × 88.1 mm |
| Maximum weight | 9.4 kg including mounting brackets |
| Operating temperature | -40 °C to +65 °C |
| Operating humidity | 5–95% RH |
| Supported access technologies | GPON, XG-PON, XGS-PON, Combo PON, GE and 10GE depending on the installed service board |
🛡️ Advanced Features
- Control board redundancy improves OLT availability and reduces the risk of service interruption if one control board fails.
- Load sharing enables efficient use of system processing and switching capacity.
- ISSU support helps minimize service impact during software upgrades.
- Advanced VLAN, QinQ, MAC forwarding, PPPoE and DHCP Option 82 functions for internet service providers.
- Support for Layer 3 functions including static routing, RIP/RIPng, OSPF/OSPFv3, IS-IS, BGP/BGP4+, DHCP Relay and VRF, depending on software configuration.
- Support for multicast and IPTV services in large FTTH networks.
- Different service boards can be combined, allowing gradual network expansion without replacing the complete OLT.
- The DC power system supports redundant power operation for telecom environments requiring high availability.
- Support for system status monitoring, alarms and power consumption monitoring.
- Modular design simplifies maintenance, capacity expansion and future migration to higher-speed PON technologies.
✅ Ideal Applications
- ISPs and telecom operators building redundant FTTH infrastructure.
- New and existing GPON networks with planned migration to XG-PON or XGS-PON.
- Central and distributed ISP POP nodes.
- OLT locations requiring redundant control and DC power supply.
- Metropolitan optical networks and larger residential projects.
- Enterprise, industrial and campus optical networks with high availability requirements.
- FTTH infrastructure requiring up to 32 PON ports in a compact 2U chassis.
Huawei MA5800-X2 with two H901MPSG-G boards and DC power supply provides a reliable foundation for professional FTTH networks. The combination of redundant control, 10GE uplinks, modular architecture and support for GPON, XG-PON and XGS-PON enables operators to deploy current services while preparing the network for future capacity growth.
Additional parameters
| Category: | Set of OLT / ONT |
|---|---|
| Warranty: | 1 year |
| Compatibility: | MA5800 |
| Size: | 2U |
